Inspection system of force tents
    Product inspection system is the production of tents essential quality assurance, control means. Product testing from raw materials into the factory to the factory, the implementation of the entire process must be checked to ensure that products meet the standards to meet the needs of users, the specific test procedures are as follows:
    First, the raw materials into the factory inspection
    After receiving the production order, the company will carefully check the fabric and model, check the raw materials and start the order. All the raw materials into the factory before the store, the company quality control supervisor, quality inspectors and warehouse managers must carefully test the raw materials to confirm the qualified before storage, inspection procedures are as follows:
    1, the company's raw materials must be identified from the company's qualified suppliers.
    2, check to confirm the material color, quantity, width, appearance quality is consistent with product production standards.
    3, check to confirm whether there is product certification, quality inspection report.
    4, check the material manufacturer, address, name, whether it has been included in the company's qualified supplier.
    5, the first use of raw materials manufacturers must be provided by the supplier quality inspection report, while the company's quality control supervisor, quality inspectors, warehouse managers of the material sampling, the company can not test the project, to entrust a qualified technical supervision department Inspection, confirmed qualified before being included in the qualified supplier, production can be used.
    6, the material inspection process, found that the material failed or can not meet the company's production standards, to return to manufacturers in a timely manner, so that substandard materials are not storage, the quality of the first material quality off.
    Second, the sample production and confirmation
     1, proofing room according to the customer sent the original sample lofting, open version, production, high-quality production of samples.
     2, the new sample size and the original sample checked correct, the new samples sent to customers, with "sample size diagram", easy to understand and confirm the customer. At the same time fill the "sample production materials detailed" archive for future reference.
     3, to be the company clerk and customers to confirm the new sample size is correct, the "business notice", "sample size diagram", "sample production materials detailed" and other information archived to facilitate the company orders for mass production verification.
     4, the customer sent the original sample, the company in accordance with the requirements of archiving strict custody.

    Third, the production process testing
    1, before cutting must carefully understand the process requirements, fabric performance, shrink the situation, with or without down, yarn and cutting when the note.
    2, check the fabric, specifications, quantity, appearance quality, whether there is color, defects, weft oblique, stains and other phenomena, find the problem in a timely manner to solve, so that unqualified materials do not open cut.
    3, painting must check the fabric, the use of yarn to the model, check the template and the sample is consistent, the operation marked the name of the film, the number of films to avoid leakage and multiple, resulting in losses.
    4, finished the finished version, carefully measured the number of materials and make a good registration, at the same time by the cutting room director carefully check the quality of painting, check whether the match with the sample, to confirm qualified before the garish, open cut.
    5, open cut, up and down, left and right pieces must check the check, whether there is a knife error, found the problem in a timely manner, to avoid the problem into the next process.
    6, quality control supervisors, picking personnel in the pick before the material must be carefully read and understand the production process standards and operating procedures, and in accordance with the physical samples or process standards for material, cutting room should be provided to the staff to provide single sheet material for inspection.
    7, quality control supervisor, technical guidance, semi-finished product quality inspectors in the production must be carefully implemented to the operator process standards, so that each operator to understand the standard requirements, and is responsible for production process guidance and quality inspection control.
    8, must be done before the production of the first product to confirm, and to fill out the "first product confirmation form." The first product confirmation includes: sewing method, accessories and metal ring position, finished product size and special requirements. By the quality control supervisor, technical guidance, quality inspection staff to be tested, to be qualified after the confirmation of signature, before mass production.
    9, each operator received a statement of work, you must carefully understand the process requirements, and do self-test, mutual inspection, on the road process failed, the next process does not produce, to ensure that the substandard process is not dirty.
    10, the operation found unqualified process or quality problems, to the quality control in time, technical guidance or semi-finished product quality inspectors to reflect, to find a solution, if the quality of the process on the face of the problem, so that the problem is expanded, The same is the same liability.
11, technical guidance, semi-finished product quality inspectors to seriously inspection, found the problem immediately pointed out that immediately rectification. To be found in the daily inspection of the problem written in the "Quality Inspection Patrol Daily Report", the technical guidance must be put forward rectification opinions, put an end to the problem again.

     Fourth, the product storage and factory inspection
    1, the product storage and the final inspection before leaving the factory, is to ensure that substandard products are not the key to the factory, it is directly related to the quality of products in the user trust and loyalty to the product, so the final quality inspectors must Each program is carefully inspected, including product technology standards, product models, logo is complete, especially the product size, metal ring position and other accessories and special requirements of the test.
    2, test results, do a good job of product inspection records, and seriously complete the product inspection report to ensure the authenticity of the report, accuracy. The questions found in the inspection are fed back to the quality control supervisor and technical director for proper handling. The seriousness of the proposed convening of quality analysis will be a serious analysis of the causes of quality problems, put an end to similar problems in the future.
    3, the product full inspection qualified, in order to fold, bagging, placing instructions, sealing, into the box. Product packing, to check the product model and the outer box marks, quality inspectors to fill out the "finished product inspection date report." Packaging finished product storage before the finished product warehouse quality inspectors to the product sampling, sampling 100% qualified before storage, storage finished products to be linked to the product lift card, quality inspectors to sign on the elevator and marked Inspection date. When loading and unloading the goods should be ordered by the type of cabinet, and to fill out the "shipping schedule", the quality sealer seal and seal after archiving.
    4, the company Minister of Health and Technology, the Department of Quality Management at least twice a week to the workshop line sampling quality of the implementation of the situation and do a good job sampling records.
   

广州朝力帐篷有限公司

2017年6月